Crystal CAD/CAM Scanning Spray

Laboratory Model CAD/CAM Spray Scanning Powder  

Perfect Scans for CAD/CAM

Crystal Spray Scanning Powder is a dry powder which reduces the reflective properties of dental model surfaces, accentuating and adding homogenious surface contrast to the finest details of plaster and die models, wax patterns, metal abutments and ceramics. 

Works with Most Scanners

With Crystal Scanning Spray, almost any type of optical or laser scanner can produce a complete and nearly flawless digital scan with precise reproduction of contours and margins, insuring an optimal final fit of the final dental restoration.

Fine Grain Powder for Even Coat

Crystal Scanning Spray is made up of a very fine powder material which will not clump on the model.

Environmentally Friendly

Crystal Scanning Spray uses a non-flammable environmentally friendly propellant.

Applications:

• Plaster Models
• Die Material
• Wax Patterns
• Metal Abutments
• Ceramics

Directions:

1. Check your model for visible imperfections and correct them.
2. Shake can until mixing ball moves freely inside.
3. Place model in front of suction device to prevent airborne particles after scan powder is applied to model.
4. Spray model from 6 to 10 inches away in short spray bursts toward a suction device.

Use and Specifications:

Application:            CAD/CAM Plaster/Die Models
                                 (NOT FOR INTERORAL USE)

Capacity:                67.5 Grams

Use with:                Any Optical or Laser Scanner

Particle Size:         Approx 10 microns